9. Roof construction etc.
Please, study the technical drawing of the roof carefully!
-
23. Pieces of clay, for the top part of the headlight.
24. 4 foundations, for the tripod of one pantograph. 1 mm pasteboard, must be cutted sloping at the underside, corresponding
to the roof rounding
25. Roofplate, of approx. 0,20 mm pasteboard, bent in the length direction.
26. Distance piece (of 2 mm pasteboard) with dimensions 3x15mm.
27. The raised roof construction (of plastic foil) bent in the length direction. Notice!
the ends of this construction should be convex!
28. Pieces of clay (spool-formed), to the ends of the roof construction.
29. Foundation to the main circuit braker (0,40 mm pasteboard) with rounded corners.
At first, fasten the roofplate (25.) to the center of roof, then the distans piece (26.) in the middle.
After that, glue the bended foil (27.) on top of 25.and 26. Be carefully, that the edges of 27. to be a tight fit to the roofplate!
Fill the cavity in the construction-ends with glue, which after drying founding a surface to press the clay (28.) against.
Then finger-forme the clay, so it get the right shape according to the drawing.
Roof details assembled.
A close up study of the finished roof construction!