13. Last jobs
"A-markers" and other small things.
With a revolving punch, press out 4 circular plates of 0,20 mm pasteboard (diam. 2 mm).
Make a folding marking in the middle of every plate, and fold them into a 90 degree angle.
Glue them together in pairs - folding against folding - so that you get the shape of an classic swedish A-marker!
Paint the "balls" in yellow 154. After drying, draw the three red lines on the ball. Use a red permanent marker.
Glue them into the right position, on the corners of the "A-cab" as shown below.
Handrails at the doors and the front ends: use 0,30 mm metal wire, who paints black before assembling.
Write Loconumber on the buffer beam with steel nib and (thin!) yellow 154.
The Numberplates (incl. numbers) are to be engraved in transparent foil, from the drawing. Before mounting, paint the plate dark grey. With an ultra-fine brush, or a steel nib, "Print" then the chosen loconumber by free hand in silver 11.
If you find this work too small, you also can buy those numberplates on the market...
Step 12 <--Step 13--> Step 14